![]() With the Get From Stylus checkbox enabled you can obtain the digitizer range by moving the pen all the way to the bottom right corner of the screen. If the pointer doesn't correctly follow the stylus or seems to drift near the edges of the screen you should modify these values. Under the TabletPC tab of the TabletMagic preference pane you'll find the aforementioned Enable Digitizer and Don't Query options, plus a pair of edit boxes where you can modify the digitizer range values. If you have any other tablet driver installed on your system, remove it and reboot before trying to start TabletMagic. You can kill the driver most easily using the "Kill Daemon" button in the "Extras" tab of the TabletMagic Preference Pane. Press Console's "Clear" button between attempts for the cleanest output. There you will be able to observe its diagnostic output, including your Machine Type string. Second, make sure the actual serial port is selected instead of "Automatic." (When Don't Query is enabled the "Automatic" setting only checks the first serial port, which is sometimes not what you want.)įor basic troubleshooting you can open the Console application before starting TabletMagic. First, under the TabletPC tab make sure the Don't Query checkbox is selected. If TabletMagic finds no tablet, or claims to see an ISD-V4 tablet, but the tablet doesn't function there are two things to check. Many - indeed most - TabletPC digitizers seem to ignore the "*" (TabletID) command, which asks the tablet to identify itself. All the information you need is in its own dedicated topic. If you have a Lenovo ThinkPad X61t you will also need an enabler to actually turn on the digitizer hardware. TabletMagic now includes an Enable Digitizer button to automate this process. The driver has been tested on several TabletPC systems and now works with most.īefore Mac OS X will recognize your TabletPC's digitizer hardware your digitizer's ID string must be inserted in the proper kernel extension file.Build b16 and later consider any system with a digitizer in the I/O Registry to be a TabletPC.Builds b14 - b15 consider all non-Apple Machine Type strings to be hackintosh systems.The current release version is TabletMagic 2.0b17d1.So to start things off, welcome! Here's where the project stands as of today, June 2, 2009: This is a dedicated topic for TabletMagic, an open source driver for Wacom serial devices that has been adapted to communicate with Tablet PC ISD-V4 digitizers. Also, TM seems to have knocked out my Bluetooth, I'm guessing that it has something to do with competing serial ports. My computer is trying to make be go insane. And as for the mind games: TM detects serial0 but doesn't see a tablet connected to it.ĮDIT 3: it's working again. Unfortunately after a restart it stopped working. Any help would be appreciated.ĮDIT: I know from when it was working before that the tablet is on serial0 but TM only detects Bluetooth-PDA-Sync and Bluetooth-Modem.ĮDIT 2: In what would appear to be my computer playing mind games with me it started working. I've tried most of the tips and tricks listed in the forum but it still won't work. TM sees the tablet and has properly enabled the digitiser (the tablet ID code is correctly identified) but it won't get any info from the tablet and thus doesn't work. I have it working on Leopard until I accidentally corrupted the system and because of that I had to do a fresh install. I've got a fresh install of Snow Leopard running on a Motion Computing J3400 and as with everyone here I'm having some issues getting TabletMagic to work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |